| Peer-Reviewed

Thermal Stability of Foils Made of Graphene-Oxide and Graphene-Oxide with Fullerene and their Composites with Methylcarboxy Cellulose and with Beta 1,3/1,6 – D - Glucan

Received: 29 August 2014     Accepted: 16 September 2014     Published: 30 September 2014
Views:       Downloads:
Abstract

This contribution contains data on thermal stability of certain materials whose initial precursor is graphite. Graphite was oxidized separately and in a mixture with fullerene C60. The prepared oxides were processed with vacuum filtration to produce foils and their morphology and thermal stability was described. The graphene oxides reacted with nano-cellulose and β-glucan to produce composites. The prepared composites in the form of foils were tested for thermal stability and further analyzed e.g. by FT-IR, SEM, etc.

Published in International Journal of Materials Science and Applications (Volume 3, Issue 5)
DOI 10.11648/j.ijmsa.20140305.24
Page(s) 226-245
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Graphene Oxide, Fullerene - C60, Intercalate, Composite, Nano-Cellulose, β-Glucan

References
[1] Bondeson, D., Mathew, A., Oksman, K., 2006. Optimization of the isolation of nanocrystals from microcrystalline cellulose by acid hydrolysis. Cellulose, 13, 171-180.
[2] Dreyer, D.R., Park, S., Bielawski, Ch.W. and Ruoff, R.S., 2010. The chemistry of graphene oxide. Chemical Society Reviews, 19, 228-240.
[3] Fakhri, A., 2013. Adsorption characteristics of graphene oxide as a solid adsorbent for aniline removal from aqueous solutions: Kinetics, thermodynamics and mechanism studies. Journal of Saudi Chemical Society.
[4] Faye, O., 2012. Adatom Adsorfbionan Graphene Saeet a First – Principle Study. The African Review of Physics, 7, 315.
[5] Hummers, W.S., Offeman, R.E., 1958. Preparation of Graphitic Oxide. J. Am. Chem. Soc., 80 (6), 1339.
[6] Chabot, V., Higgins, D., Yu, A., Xiao, X., Chen, Z. and Zhang, J., 2014. A review of graphene and graphene oxide sponge: material synthesis and applications to energy and the environment. Energy Environ. Sci., 7, 1564-1596.
[7] Chng, E.L.K., Pumera, M., 2013. The Toxicity of Graphene Oxides, Dependence on the Oxideline Methods. Chem. Eur. J., 19
[8] Chovancová, A., Šturdík, E., 2005. Vliv beta glukánov na imunitní systém člověka (Effects of beta glucans in human immunity system). Nova Biotechnologica, V-I, 105-121.
[9] Ioelovich, M., 2012. Optimal Conditions for Isolation of Nanocrystalline Cellulose Particles. Nanoscience and Nanotechnology, 2 (2), 9-13.
[10] Klouda, K., 1985. Interkalární sloučeniny grafitu. (Intercalation compounds of graphite) Dissertation, VŠCHT Praha (available in the technical library in Prague 6 – Dejvice).
[11] Krishnan, D., Kim, F., Luo, J., Cruz-Silva, R., Cote, L.J., Jang, H., Huang, J., 2012. Energetic Graphene oxide: Challenges and opportunities. Nanotoday, 7, 137-152.
[12] Kyzas, G. Z., Deliyanni, E. A. and Matis, K. A., 2014. Graphene oxide and its application as an adsorbent for wastewater treatment. J. Chem. Technol. Biotechnol., 89, 196-205.
[13] Li, Y. and Ragauskas, A. J., 2011. Cellulose Nano Whiskers as a Reinforcing Filler in Polyurethanes. Advances in Diverse Industrial Applications of Nanocomposites, Dr. Boreddy Reddy (Ed.).
[14] Makharza, S., Cirillo, G., Bachmatiuk, A., Ibrahim, I., Ioannides, N., Trzebicka, B., Hampel, S., Rümmeli, M.H., 2013. Graphene oxide-based drug delivery vehicles: functionalization, characterization, and cytotoxicity evaluation. Journal of Nanopart Res, 15, 2099.
[15] Neto, A.H.C., 2009. Adatoms in Graphene. Solid State Communications, 149, 1094-1100.
[16] Peng, B. L., Dhar, N., Liu, H. L. and Tam, K. C., 2011. Chemistry and Applications of Nanocrystalline Cellulose and its Derivatives: A nanotechnology Perspective. The Canadian Journal of Chemical Engineering, 9999.
[17] Peng, H., Meng, L., Niu, L. and Lu, Q., 2012. Simultaneous Reduction and Surface Functionalization of Graphene Oxide by Natural Cellulose with the Assistance of the Ionic Liquid. The Journal of Physical Chemistry, 116, 16294-16299.
[18] Rodrígues-González, C., Martínez-Hernández, A.L., Castano V., Kharissova, O.V., Ruoff, R.S. and Velasco-Santos, C., 2012. Polysaccharide Nanocomposites Reinforced with Graphene Oxide and Keratin-Grafted Graphene Oxide. Industrial & Engineering Chemistry Research, 51, 3619-3629.
[19] Russo, P., Hu, A., Compagnini, G., 2013. Synthesis, Properties and Potential Applications of Porous Graphene: A Review. Nano-microletters, 5(4), 260-273.
[20] Shen, H., Zhang, L., Liu, M., Zhang, Z., 2012. Biomedical Applications of Graphene. Theranostics, 2(3), 283-294.
[21] Troshin, P.A., Lyubovskaya, R.N., 2008. Organic chemistry of fullerenes: the major reactions, types of fullerene derivatives and prospects for their practical use. Russian Chemical Reviews, 77(4), 305-349.
[22] Trzaskowski, B., Adamowicz, L., Beck, W., Muralidharan, K., 2013. Impact of Local Curvature and Structural Defects on Graphene-C60 Fullerene Fusion Reaction. BBarriers J. Phys. Chem., 19669-19671.
[23] Wang, Y., Zhang, P., Lie, Ch. F., Zhan, Y., Li, Y. F. and Huang, Ch. Z., 2012. Green and easy synthesis of biocompatible graphene for use as an anticoagulant. The Royal Society of Chemistry, 2, 2322-2328.
[24] Yoo, B.M., Shin, H.J., Yoon, H.W., Park, H.B., 2013. Graphene and graphene oxide and their uses in barrier polymers. Journal of Polymer Science: Polymer Physics.
[25] Zhang, Y., Ren, L., Wang, S., Marathe, A., Chaudhuri, J. and Li, G., 2011. Functionalization of graphene sheets through fullerene attachment. Journal of Materials Chemistry, 21,5386.
[26] Liao, K-H., Lin, Y-S., Macosko, Ch.W. and Haynes Ch.L., 2011. Cytotoxicity of Graphene Oxide and Graphene in Human Erythrocytes and Skin Fibroblasts. ACS Appl. Mater. Interfaces, 3, 2607-2615.
[27] Zhu, J., Zhu, L., Lu, Z., Gu, L., Cao, S. and Cao, X., 2012. Selectively Expanding Graphene Oxide Paper for Creating Multifunctional Carbon Materials. J. Phys. Chem. C, 116 (43), 23075-23082.
[28] Park, S., Suk, J.W., An, J., Oh, J., Lee, S., Lee, W., Potts, J.R., Byun, J-H. and Ruoff, R.S., 2012. The effect of concentration of graphene nanoplatelets on mechanical and electrical properties of reduced graphene oxide papers. Carbon, 50, 4573-4578.
[29] Chen, J., Zhang, G., Luo, B., Sun, D., Yan, X. and Xue, Q., 2011. Surface amorphization and deoxygenation of graphene oxide paper by Ti ion implantation. Carbon, 49, 3141-3147.
[30] Hu, N., Meng, L., Gao, R., Wang, Y., Chai, J., Yang, Z., Kong, E.S-W. and Zhang, Y., 2011. A Facile Route for the Large Scale Fabrication of Graphene Oxide Papers and Their Mechanical Enhancement by Cross-linking with Glutaraldehyde. Nano-MicroLetters, 3 (4), 215-222.
[31] Su, Ch. and Loh, K.P., 2013. Carbocatalysts: Graphene Oxide and Its Derivatives. Acc. Chem. Res., 46 (10), 2275-2285.
[32] Navalon, S., Dhakshinamoorthy, A., Alvaro, M. and Garcia, H., 2014. Carbocatalysis by Graphene-Based Materials. Chem. Rev., 114 (12), 6179-6212.
[33] Saeedfar, K., Heng, L.Y., Ling, T.L. and Rezayi, M., 2013. Potentiometric Urea Biosensor Based on an Immobilised Fullerene-Urease Bio-Conjugate. Sensors (Basel), 13 (12), 16851-16866.
[34] Kabir, M., Mukherjee, S. and Saha-Dasgupta, T., 2011. Substantial reduction of Stone-Wales activation barrier in fullerene. Physical Review
Cite This Article
  • APA Style

    Klouda Karel, Zemanova Eva, Friedrichova Romana, Bradka Stanislav, Gembalova Lucie. (2014). Thermal Stability of Foils Made of Graphene-Oxide and Graphene-Oxide with Fullerene and their Composites with Methylcarboxy Cellulose and with Beta 1,3/1,6 – D - Glucan. International Journal of Materials Science and Applications, 3(5), 226-245. https://doi.org/10.11648/j.ijmsa.20140305.24

    Copy | Download

    ACS Style

    Klouda Karel; Zemanova Eva; Friedrichova Romana; Bradka Stanislav; Gembalova Lucie. Thermal Stability of Foils Made of Graphene-Oxide and Graphene-Oxide with Fullerene and their Composites with Methylcarboxy Cellulose and with Beta 1,3/1,6 – D - Glucan. Int. J. Mater. Sci. Appl. 2014, 3(5), 226-245. doi: 10.11648/j.ijmsa.20140305.24

    Copy | Download

    AMA Style

    Klouda Karel, Zemanova Eva, Friedrichova Romana, Bradka Stanislav, Gembalova Lucie. Thermal Stability of Foils Made of Graphene-Oxide and Graphene-Oxide with Fullerene and their Composites with Methylcarboxy Cellulose and with Beta 1,3/1,6 – D - Glucan. Int J Mater Sci Appl. 2014;3(5):226-245. doi: 10.11648/j.ijmsa.20140305.24

    Copy | Download

  • @article{10.11648/j.ijmsa.20140305.24,
      author = {Klouda Karel and Zemanova Eva and Friedrichova Romana and Bradka Stanislav and Gembalova Lucie},
      title = {Thermal Stability of Foils Made of Graphene-Oxide and Graphene-Oxide with Fullerene and their Composites with Methylcarboxy Cellulose and with Beta 1,3/1,6 – D - Glucan},
      journal = {International Journal of Materials Science and Applications},
      volume = {3},
      number = {5},
      pages = {226-245},
      doi = {10.11648/j.ijmsa.20140305.24},
      url = {https://doi.org/10.11648/j.ijmsa.20140305.24},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20140305.24},
      abstract = {This contribution contains data on thermal stability of certain materials whose initial precursor is graphite. Graphite was oxidized separately and in a mixture with fullerene C60. The prepared oxides were processed with vacuum filtration to produce foils and their morphology and thermal stability was described. The graphene oxides reacted with nano-cellulose and β-glucan to produce composites. The prepared composites in the form of foils were tested for thermal stability and further analyzed e.g. by FT-IR, SEM, etc.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Thermal Stability of Foils Made of Graphene-Oxide and Graphene-Oxide with Fullerene and their Composites with Methylcarboxy Cellulose and with Beta 1,3/1,6 – D - Glucan
    AU  - Klouda Karel
    AU  - Zemanova Eva
    AU  - Friedrichova Romana
    AU  - Bradka Stanislav
    AU  - Gembalova Lucie
    Y1  - 2014/09/30
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ijmsa.20140305.24
    DO  - 10.11648/j.ijmsa.20140305.24
    T2  - International Journal of Materials Science and Applications
    JF  - International Journal of Materials Science and Applications
    JO  - International Journal of Materials Science and Applications
    SP  - 226
    EP  - 245
    PB  - Science Publishing Group
    SN  - 2327-2643
    UR  - https://doi.org/10.11648/j.ijmsa.20140305.24
    AB  - This contribution contains data on thermal stability of certain materials whose initial precursor is graphite. Graphite was oxidized separately and in a mixture with fullerene C60. The prepared oxides were processed with vacuum filtration to produce foils and their morphology and thermal stability was described. The graphene oxides reacted with nano-cellulose and β-glucan to produce composites. The prepared composites in the form of foils were tested for thermal stability and further analyzed e.g. by FT-IR, SEM, etc.
    VL  - 3
    IS  - 5
    ER  - 

    Copy | Download

Author Information
  • V?B-Technical University of Ostrava, Faculty of Safety Engineering, Czech

  • State Office for Nuclear Safety, Prague, Czech

  • Ministry of the Interior – General Directorate of the Fire Rescue Service of the Czech Republic, Technical Institute of Fire Protection

  • National Institute for Nuclear, Chemical and Biological Protection, Kamenna , Czech

  • V?B-Technical University of Ostrava, Faculty of Mining and Geology, Czech

  • Sections